After getting the wrong brakes the first time, then getting the run around from Wilwood about them being out of stock.....they showed up 2 days later. Been working on getting the right rear brakes for 2 months. But they are the right brakes!!
140-9219 is the Wilwood part number to put their non drilled 12.88 Spec 37 rear brakes on an 8.8 from a 31 spline ford explorer. Note that this axle has the new style Ford big bearings (Its not even remotely similar to a mustang rearend).
Instructions are terrible but they go on good enough.
Integral Emergency Brake fitted up with Lokar Emergency Brake cable.
12.88 slotted 2 piece Spec 37 Caliper and 4 piston Forgen Narrow superlite caliper.
Rearend is just about buttoned up at this point. I have to finish up the pass side brakes and safety wire all of the 2 piece rotors but the diff is reassembled, c clips back in, diff cover sealed up and final installed.
I am digging this pic.
I have wheel spacers for the front that will get it to a roller with the wrong wheels. Still need to trim inner drivers side rear wheel well to get the rear tires on, it will have to wait till sometime next week.
Sean