been moving forward....I have been wiring the car. I wanted everything loomed and clean and accessible.
Engine in.
I used a C&R universal radiator with oil cooler. I made my own mounting bracket and running a spal fan with DCC PWM fan control.
need to move around some wires but here are some of the looms everything is wrapped, taped, i used a combination of zip ties and plastic ring clamps that attached into bolt holes
I have the VA condenser in. I will need to modify the hood latch and support to clear the supercharger hx. The ac dryer will need to be moved as well. I will also tape the core off and paint the sides and tab black. then lightly paint the core to help black it out.
Whats next:
Rock Valley / Vaporworx fuel setup
Ubuild it Air Raid intake
Test fire.