Quote:
Originally Posted by ErikLS2
I've done lots of those, used to remove those cam gears with the timing covers on but hard to explain with just words, the left and right bank cam gears are the same but each side uses different marks. You also gotta push the hydraulic tensioner back and put a pin in it to hold it retracted, this gives you enough slack in the chain to get it on, once the chain is on you pull the pin on the tensioner.
The cams sit in a kind of relaxed state when in the right place, then the crank has to be obviously in the proper relation to them to put the chain on, so you might have to rotate the crank some. Just be careful, you don't want a piston to hit an open valve (duh!). Can you post any pics of its current state?
|
I think I figured it out but I'm still not 100% sure I got it right I'll put up some picks . Thank you! I offered a Toyota Mechanic $200 to stop over to see If I have it right . Never happened
