[Build-It-Break-it]

[QUOTE=gerno;687469]Ahmad - Don't do it. Just use the Speedtech mounts you already have on the car. If i had it to do again I would do like you did and simply modify the Speedtech stuff vs starting new. I've done a lot of "optimizing" and doubt there will be any real gain vs the work I've done. Keep the car simple and enjoy it. If you want to cut something up, get a true race car. Thats my new perspective.[/QUOTE

Gotcha. Id have to show you pictures of how I did my rear set up. I "grafted" in the panhard bar mount into the original speedtech crossmember.

I was going to do the same for the "dog bone" style adjusters your using but if it's not worth then then I might just leave them as is. I already have them but if there's no benefits then I'll probably take your advice.

I was thinking it would be way easier to jack the car up slightly and be able to adjust ride height from in the trunk.

I literally went out to the garage last night when I saw your updated and started planning it. Im in the same boat as you tho, I just want to drive my car at this point but always see the latest and greatest and want want want.