Bumper 2.0 turned out much stronger. I used a high quality 12k fabric and a 2mm core material along with adding an additional layer of 12k. So it's 1 outer layer of 3k 2x2, 2 layers of 12k 1x1, 2mm honeycomb core, 1 layer of 12k 1x1. it eliminated a lot of the flimsy feel and made it a lot stronger. It has a few blems on the ends, but this is getting painted black anyways so I'm not worried about it. Now that I have my rear bumper done I'm going to move back to the tail lamp housings. In full carbon.
|