In case anyone was wondering, I'm still plugging away on the Chevelle but I've been very lazy with thread updates. Instead of boring you with all the little details, I'll just post the most current stuff...
Here it is on the ground for the first time in a while. I had the Forgelines widened to 18x11 and 18x12. The tires are a used set of 315s and 335s I got from Ridetech. They're good enough to roll around the shop and even for some test drives when the time comes. I have the mock up engine in place mounted to the Quicktime bell and T56. Engine set back looks good too.
20190317_210712 by
Yelcamino, on Flickr
20190318_101809 by
Yelcamino, on Flickr
20190318_101754 by
Yelcamino, on Flickr
20190317_210552 by
Yelcamino, on Flickr
20190317_210727 by
Yelcamino, on Flickr
With the help of some friends, I made new steering arms.
20190318_101949 by
Yelcamino, on Flickr
I've also been busy bending sheetmetal for the interior. Right now it's just screwed together to make sure it all fits.
20190214_190154 by
Yelcamino, on Flickr
Finally, I got the fuel cell mounts figured out.
20190112_170316 by
Yelcamino, on Flickr
20190112_170248 by
Yelcamino, on Flickr
The next big task will be removing the body again, mounting the chassis on a rotisserie so I can complete all the cage welding and other various things that are currently tacked together.