Quote:
Originally Posted by Blake Foster
A little update after the test day.
Interesting tuning observation we had 1.5deg neg camber. in the car tire wear and temp 180 ish was close but we added 1/8 shim to give almost 2 deg. and the inside tire temp went WAY 220 if i recall up and the added wear showed as well. out came the shim may go 1/2 way and add 1/16 shim if we get any more test time on it. But that was very interesting to see a small change make a big difference.
|
Blake, I have run into this before with a lot of dynamic (full compression) caster. If the suspension is set up for a lot of caster gain with travel, then the camber can get way up there when the wheels are turned, adding to the static camber. Just a thought, fwiw.
Edit: When I maxed out the caster (mechanical limit) on my Viper, I had to back the static camber down to -1.8 degrees from -2.6 degrees to make the tire temps happy.
Cheers
Pappy