Quote:
Originally Posted by CamaroAJ
I have questions about the dyno results. Your numbers seem low based on you changing heads, cam and a ported blower. I mean, you're putting down cam only with over driven blower numbers. With a ported blower and those heads you should be closer to or over 700.
|
Yes, I left some on the table. I am only running a 9.5" lower with a stock upper (23% OD) pulley. I'm also running a ported 90mm vs 102mm and i'm running a 4" intake tube not a 5". I wasn't looking for peak power I wanted a solid street car. Plus the last pull was cooled down but still warm from earlier pulls.