Quote:
Originally Posted by Gscherer78ta
What diameter is your round filter - I'm guessing that you don't feel like the filter area is choking your flow?
|
Greg, interesting data point here. When I dynoed a couple of weeks ago, we did so both with and without my current round filter installed. We removed it after a few pulls since we noticed vacuum in the manifold and wanted to see if it was the filter. It made very little difference. So we did the tuning without it installed and then reinstalled for one last pull. We lost 6HP when reinstalled, but it was also heat soaked, so to me it was little to no loss.
The filter I'm using is a 9 3/4" round 3" tall K&N at the moment just to give you an idea...
Quote:
Originally Posted by Gscherer78ta
I'm leaning on fabbing my own plate - blockers/WFO style such that my shaker can fit onto it with the stainless ring and then use a rectangular KN filter fitted into the shaker itself. When I make the plate I can adjust for tilt and off center. I'm concerned that with the Victor Jr. style intake I have that I'll run out of height- so the rectangular filter appeals to me.
|
I look forward to seeing what you come up with. Keep us posted. I'll get back on my own setup here soon...