[130fe]

I just went through this with my digitails. My turn signal would work but the 4 way flasher wouldn’t blink (only come on steady). I called Digitails and this is what they told me to troubleshoot. I knew my wiring (including grounds) was good. Take a test light (looks like a pick with a bulb in handle with a wire with alligator clip on end of wire coming from handle) and connect the ground clip to a ground and put the test light tool point in the wire circuit that is the issue. The bulb in the test light puts enough of a load and everything worked correctly again. If the test light fixes your issue go to Amazon and buy a couple of these. I added one on each side (rear flasher wire), (one end of the load resistor ties into the circuit/other end is grounded).

SOCAL-LED 2pcs LED Load Resistors 25W 10ohm LED Bulbs Turn Signal Error/Blinker/Hyper Flashing