[CamaroAJ]

Saturday it doesn't look like I got much done mainly because I had the dash in and out so many times and lots of trimming and hammer and dolley work. That said I actually got a lot done on the dash. The stock upper dash metal was cut down to give a lip to tuck the C6 dash under for a clean transition to the windshield and the C6 dash was trimmed down to the body curve. I built a new center mount and put some dimples in it to stiffen it up and shed some weight. I also plan on mounting my HVAC from the center mount. I had the HVAC module in for some measuring so once I build the box mount I'll be able to get it in the car as well.

Mount wise I still have to finish the passenger mount. I built 5 lower tabs that the slips between the upper body and the tabs to hold everything in place and not move around. I still need to finish both ends of the stock upper and get the VIN tag area squared away. Once wrapped in leather and painted I think it will all look really clean like it cam from the factory that way.