[CamaroAJ]

I was able to get back to work on the car Saturday after a few weekend off between work and family being in town. I picked up a LS9 supercharger because it fits my car better in terms of the accessory drive. It however will need a 1/2" adapter plate to fit the ZL1 lid to it so I had to check fitment. Clears the hood just fine, but its a 1/4" away from the passenger side firewall. I think I'll be ok as I'm running poly mounts.






With that done I finished up the dash. First I finished up the passenger mount and then the upper dash metal fit and welded.




After all of that I got the front end square, measured where to put the core support mounts and got the frame cut, rewelded, random holes fillled and then the front end all back on to double check with the radiator back in to make sure I'll still clear.




I was out of time and needed to clean up, but I have a Chevy Trax coolant reservoir that I wondered how it would fit into the build. It actually looks like that will be a good area for it so I might order a new one up. It would mount nicely to the inner fenders that I still have to build.



During the week I've been tinkering with how to mount the fan using the stock radiator mounts. I need a different piece of aluminum for the other side, but I think this will work out nicely.