Quote:
Originally Posted by hackster
Finally got around to installing this bad ass Turn One Power steering pump and billet pulley.
The only snafu so far is the BTR kit shorted me snap rings for the trunions. They sent them out overnight to me but when they showed up they were the wrong ones so waiting on those still.
I did measure for pushrods and they were correct at 7.400 so got those and 15 of 16 rocker arms installed.
I had a hand this weekend from my nephew and Asher, always nice to have a hand. Thanks dudes.
Looking forward to getting this thing back together, should be pretty potent.
Question for you road racers, what are you doing for oil coolers and where are you mounting them? Any links or pics would be awesome.
Sean |
Your trunnion upgrade is a nice addition compared to the stockers, there's a good thread going on over at LS1tech about this.
https://ls1tech.com/forums/generatio...failure-7.html
On another note I need some info on your pressure PS line if you don't mind sharing. I'm going to be using LS1 accessory spacing and your pressure hose looks like it might work with whats needed. Any vehicle application or numbers?
Thanks in advance.