[Rodknock]

Driver side B pillar was pretty messed up, and had some shoddy repair work done. (not that I'll do much better) Looks like something fell against the car at some point, because the quarter panel had a dent in it, that lined up almost perfectly with the damage on the pillar.

Once I got it down to bare metal, I started welding up the holes, and also straightened it out as much as I could. I didn't get a good shot of the window channel, but it was bent inward about 1/2"









I decided to try out Eastwood's Body Solder kit, instead of slapping a bunch of filler on it. Especially a high stress area like this, that is prone to flexing and cracking. Works pretty well, although it's tough applying it to a vertical surface.