Kurt sent me a couple of new pictures with some additional progress... I’m going to install a radio that will be hidden and operated via Bluetooth on phone, so we filled in the portion of the dash where the factory radio mounted. From the factory, that portion of the dash is flat, but Kurt patched in a piece that has the same contour as the rest of the dash, which should look much cleaner. He also filled in where the ash tray was, as well as the factory locations for ignition switch, lights and wipers. I’m installing a push button RFID start system, so we’ll drill new holes for the starter button, as well as light and wiper switches. Here are before and after pictures:
Photo with vent installed... we’ll paint the vents a solid black color
Sent from my iPad using Tapatalk