Saturdays adventures with the car I taught myself how to use a shrinking disk. I made more progress with the disk in 15 min then I did with hours of hammer and dolly work. It also help a lot with some tin canning I had.
I was able to get the high spots taken care of on the driver and passenger sides of the roof.
I also finished welding the front section of the roof. I still need to hammer and dolly that section and hopefully not much with the shrinking disk.
To gain access to the bottom I needed to cut the structure out from under the roof. Since I had it out and access I decided to put some dimples in it. every little bit of weight savings adds up.
I finished up the day taking the front end apart so I can start working on the core support during the week after work. The radiator laid out looks killer exposed like this.
