There was more progress. I'm running a Dakota Digital RTX gauge set up with a DD cruise control, fan controller, BIM box and because it is a connect and cruise kit the gear Shift indicator sensor.
Here's the plate they're going on
Here are the relays for the cooling fans
Here's the sensor for the gear shift
The trans was tight for connecting the controller wiring, the connector was too close to the floor. Brian dropped the spacer I had to get my drive train angle and took about 1/2" off the spacer and now the plug fits by 1/4". He tigged it back together and painted it up, and now were done with that.
trans wiring plug
