View Single Post
  #7  
Old 12-03-2006, 03:33 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,449
Thanks: 7,562
Thanked 2,315 Times in 1,084 Posts
Default

Quote:
Originally Posted by rocketman
I read this on another site,the guy who made the original post was breaking the pumps,because the car was tire shaking so bad that the vibrations where going there the solid motor mounts to the weakest link,the oil pump,the pumps still work's and for a street car are fine don't jump to consulsion,sounds to me if the guy would learn to set the car up it wouldn't tire shake.


Some how I don't see where GM cares what a aftermarket reman supplier does with there parts,when GN hasn't used a SBC motor in 6yrs.

Anyway make your own choice's but take in to consideration the problem the gy was have causing a oil pump to break,that is some serious tire shake.
There have been several failures not attributed to tire shake. Why would anyone run the weaker pump casting when you can get one that won't fail for a few dollars more.

Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote