[Tinker]

Thanks for all your input everyone.
I hopefully will stay at this now.

A quick shout out to Speedtech.
Got my frame today. Very nice piece. This will save me some cutting and necessary tweaking on my original frame to align everything and install the coilovers.
It's like I just finished weeks of work in one day!
I bolted the arms spindles and rack on...everything is coming out right where my measurements should be spot on.
Added shims on uca's to get my distance side to side and bam! 1/2-1 degree camber. Checked caster right at 9.5 degrees.
I will have some obstacles ahead putting in the Pontiac motor and attaching the tie rods to the steering arms, but this is the most progress in many years.
Thanks again. I hope to continue updates in my build thread.