08-09-2020, 08:00 PM
|
 |
Lateral-g Supporting Member
|
|
Join Date: Apr 2015
Posts: 700
Thanks: 1,434
Thanked 900 Times in 362 Posts
|
|
Sprayed some red paint just to help with seeing air bubbles while laminating. Not using any gel coat here -- it's just a splash mold, so not really necessary in my opinion.
4 coats of wax, 2 coats of PVA mold release, laminated with 4 layers of cloth. Then drilled for rivets.
Mold removed and busted out the balsa plug.
Cut open for laminating.
4 coats of wax, 2 coats of PVA mold release, then riveted the mold to the headliner.
Green sheen is the PVA.
Laminated with 1 layer each of 3/4 ounce and 1 1/2 ounce mat. Mold removed. A little clean up and primer on the way.
|