Working on a better location for the brake line transition from hard line to flex lines. Which means I needed to bring the front wheels home so I can run the suspension through it's full travel and make sure the lines are safely and securely mounted.
It's nice to see the Billet Specialties Wheel back on the car. At some point I need to find replacement tires for the car as these tires have
First up is to find a good location for the hard line tab. In order to remove the clip off i needed to secure the line in my Grandfathers Vice. I have to thank my buddy Ben for building the cart and the vice mount so I can move it around in my garage.
Bag & Tag everything is my moto and make sure you take pictures of the bag so you can easily go back to your dated pictures and figure everything out.
As you can see this location is my 2nd attempt as the first one was a complete fail.
Time to secure it with Clear Gorilla Tape.
Drivers Side and yes the 1st try failed.
Yes I have issues and you should have seen me hanging over the car and holding on to the tire rack to get this picture. I wanted to make sure the brackets were symmetrical and taking the picture allowed me to look at it better.
BTW the inner fenders were removed and test fitted to make sure this location works.