My plan is to keep this car simple and order a new steel trans pan with a drain plug and use ARP bolts to make it a little nicer.
Time to mount the Radiator ...
So i need to lower the radiator down so out came the floppy disk.
While I am here I decided to fit the old trans lines and see if I can come up with something a little cleaner looking.
My favorite line that Kenny did.
Fitting the Fan Shroud.
The shroud also doubles as a way yo secure the radiator.
Plan "B" Okay new lower rubber mounts.
Time to remove these tabs.
and there gone....
Fitting the Anvil Radiator Close Out.
More Notes
