Quote:
Originally Posted by WSSix
Great work. Better hurry as that cold weather will snap soon.
|
Thanks, buddy and boy did the weather turn ... from 70's to 30!
Well make a goal and 
Got the radiator mount painted a single-stage black along with the Speed Tech inner wheel wells and then mounted driver's side to see what interference with the clutch master cylinder ...
needs a hole to clear master and AN3 fitting.
Looking like a car again ...
While the weather was good I got some putty on the fender and sprayed some SPI epoxy on the driver's door and passenger fender and left in the garage with a heater on overnight to cure the paint ...
Still needs a layer or two of primer/ surfacer and sand down w 400 grit!
Hopefully I'll get the door hung and semi straight before long and then get the rest of the front end sheet metal installed and aligned.
Thanks for looking ...