[64G-lark]

Something else I wanted to address are bump stops for the rear end. I know the coilovers have bumpers to prevent bottoming out the shocks but this is designed to protect the shocks. I have seen multiple times guys break drive shafts and dent floorpans from the suspension hitting. I made some brackets with nuts welded on the backside that I could plug weld to the frame. I then used some pre fabricated brackets from Allstar performance. I welded a mounting plate to them so they could be bolted on and some Energy Suspension stops. I set the distance by jacking the rear end up and determining the height I could move up to before the rear end made contact with the floor pan. The stops themselves will contact the truck arms just ahead of the rear housing. This mounting arrangement will allow adjustments if needed and I use different stops if desired to cushion the compression.