[Rodknock]

For those contemplating a Heidt's setup, some of their stuff is kinda quirky. For instance, the front aluminum hubs are Willwood, and take a 1/2" wheel stud, but the rear hubs, are apparently Corvette hubs and have a 12mm wheel stud. Had to spend $100 for 10 new wheel studs from ARP. These are specific for converting C5 hubs to SAE 1/2" studs. Just drill out the hole with a 1/2" drill, and good to go.
Don't make fun of my spark plug socket on the press. As soon as the stud bottomed, I stopped. It was the perfect fit for what I needed to do.

Get out the BFH





I made sure the table was level with the drill head. Don't want it to be angled







Don't laugh, it worked