[64G-lark]

I was impressed with how Kevin_l configured his mount for his fuse panel and incorporated a clutch pedal stop and a switch to know the clutch is depressed. I shamelessly built a similar panel out of some scrap aluminum I had laying around. I added some 1/2” bushing to the rear to space it off the firewall. My youngest son Chase took it to his high school welding class and tig welded the bushing to the back side. I wanted to mount it without drilling any new holes so I welded some bolts to the back side of a bracket I made that mounts the clutch master cylinder and it will use one of the screws from the pass through on the front wiring harness. The clutch stop is adjustable as is the switch. The switch itself is a 2002 Camaro. Thanks for the idea Kevin.