Quote:
Originally Posted by andrewb70
Great progress Marty. You'll be ready to fire it up soon! Merry Christmas.
Andrew
|
Thank you and I hope you had a wonderful Christmas.
Quote:
Originally Posted by WSSix
Are you worried about heat getting into the tank? I'd think with the exhaust being that far from the engine and it being wrapped that it shouldn't be a concern. You're just driving the car, correct?
|
You are correct I am literally building this car just drive around have fun. Will never see a track and will see any trailheads.
Quote:
Originally Posted by WSSix
I believe I showed in my thread how I got my fuel lines from the tank to the chassis. Basically, I mounted hard lines on the tank and ran them to the front and around to the side where they jumped to the frame rail via flex hose. This put the fuel lines right above the split in the tank so a few inches lower than you are now. I welded a tab to the side of the tank to act as a bulkhead for mounting the tubing.
|
You did i just went back and looked. I pretty much copied your idea using the Holley PFT lines.