OK so plan B..
Fill radiator with gravity funnel and just water... then put a pressure tester on it .
Put 10-15 gallons of fuel into the vapor works tank to prime pump.. crack feed line to get Air out.. then allow system to build pressure.. look for fuel leaks..
bring to exhaust shop..
bring home.. and start. (god willing)
FIWIW i am planning for the worse outcome I guess.. my only reason for not putting water and exhaust on .. in just in case something goes wrong.. and the motor needs to come out.. or front end apart.... I had the pan off the water pump and intake all off at some point..
|