Got the fenders loosely installed. Funny how I bagged and tagged every nut, bolt, and shim, but it still ends up needing to be tweaked. They just never go back together the same way twice.
I'm going to have to work the door gaps of the AMD fender on the passenger side, at the top along the curve, leading up towards the windshield. The angle of the curve in the panel is pretty far off from the curve of the door at the top. Also the door to fender gap at the very bottom of the door will need work. Not much though. It's more of an issue with the door, not the fender with that part. gaps are perfect at the rear of the door, and along the rocker panel, so doors are adjusted perfect.
Driver side has an OEM fender, so the gaps are fairly decent with that one. I just need to do some body work, and weld in the tab for the RS headlight stuff, since it was a standard fender.
