Quote:
Originally Posted by andrewb70
You don't want to bury the ECU because you will want access to the wiring and also to feed the USB cable for tuning.
Under the passenger seat is another options. Also make sure that the ECU case is not grounded to the chassis.
If I can be of service with the tuning, please let me know.
Andrew
|
Andrew if I run into anything (which likely I will... lol) I will hit you up. Wish under the seat was an option as well but I'm have some Z06 seats that I have modified to bolt up to the factory bolt pattern and they sit low to the seat brace.
I know its important to access things like this and was going to fabricate a compartment at the toe well like the c6 vette has but I know this is an area that gets hot from the headers being close to that location.
I'm hoping that after staring at it long enough it will all click on where to put it
lol.
BB