Quote:
Originally Posted by blitzer454
My windows are quick but I don't feel they are excessively fast.
Okay I went back and double checked my measurements and I did screw them up. I have my over current A/D count value set to 0x200 (hex) which translates to 2.5V (10 bit A/D counter with 5V reference). I was mistakenly taking that voltage value as the current forgetting that I have a voltage divider on the A/D channel such that 5V scales to 30A. So 2.5V is actually 15A. On a side note I have the rear window over-current set to 0x115 which translates to 8.11A. Sorry for the confusion.
So I guess the Nu-Relics spec values are actually pretty close to what I'm seeing in the real world.
I would like to say that my windows are perfect, but they're not. They like to leak around the seal at the top of the window when I hit them with the water hose, but they're not to bad in the rain.
|
You should have taken the glass alignment god title and ran with it…
Don