Quote:
Originally Posted by redfire69
Hi guys,
So dry assembling my car, 69 Camaro stock dash carrier and stock tilt column, the column is hitting the dash carrier before I can barely get the nuts started. I see they sell a shim below, but the assembly manual does not call for it on the 69. Does anyone know do I use this shim? If so, just one side or both sides and which way does it go in (handle pointed to front of car)?
This is what I get for starting with a basket case!
Thanks in advance for any help!! Ron
 |
Following this as well. I used some washers below to space mine down 1/8th inch to clear my racepack which is surface mounted. This shim looks like a much more appropriate method.