Quote:
Originally Posted by jmac
Maybe I'm confused on the orientation? I would think either one would need 2 people to assist unless you can reach the other side of the panel you're putting this on.
For example, placing one of these in the firewall with the hidden fasteners, you'd need someone on the engine side to hold the billet piece in place and then someone on the interior to start the bolts.
With the visible fasteners you'd need someone to put the nuts on the bolts on the interior side.
I was thinking of using those threaded nut inserts that are like rivets to thread in to, or tacking on some nuts to be able to catch the bolts.....
|
The weight of the engine harness and studs going through the firewall will hold it enough to place the nuts on and tighten it inside the interior. I did it the other day solo.