Quote:
Originally Posted by srode1
I didn't realize the Speedtech cross brace / driveshaft loop extended up beyond the floorboard until I saw your pictures, thanks for posting.
|
The entire cross brace actually sits on top of the floor pan. The only place where it penetrates through the floor is about a 4 inch section on each side of the trans tunnel. This portion that extends through the floor is where you bolt on the brace for the torque arm. The ends of the cross brace get welded directly to the rockers above the floor pan and the subframe connectors come up through the floor and welded to the cross brace. The seat pans will have to be notched slightly on the left and right to go over the cross brace as well as down the middle to clear a portion of the subframe connector.
I know I had some pictures of the entire install process but I cant find them. Here is a picture of how they come through the floor pan.
