[syborg tt]

At some point I removed the Tech-Flex wire wrap to expose the wires so I could run them in the direction I wanted them to go.







While we are here I might as well remove the wire's that I will not need.





Twist ties are your friend when doing small projects like this.



I also pulled out the Holley Dash and the Classic Dash Insert.



I also re-wrapped the wire loom.





Here is the part description for the small firewall grommet that I used on the DBW Pedal and the Vacuum hose.




Since I had a second person I could finally/temporally install the drive by wire pedal bracket.