Working on remote coil mounts today. I originally was using some ADE remote mounts that bolt to the rear of the cylinder head. Worked perfect until I decided to slide the engine further back and lost my firewall clearance...
Picked up some
Holley remote coil mounts. These can be mounted anywhere. I wanted for them to be hidden so opted to mount them on the frame rails.
I built some spacers to gain the clearance needed for the coils to clear the frame, and machined a recess on the bottom to sit over the nutserts I installed in the frame, so the spacers would sit flat. Next up is to build the plug wires to fit.