[syborg tt]

My plan is to start the car up before I make the final "Wet" connection to the motor. So I ordered this little hose that ICT Billet offer so I can bypass the Vintage Air.





Not sure why I took this picture but I like it.



Tank is going back in and I am going to finalize the wiring to the Fuel Pump and sending unit. ( 10-09-21 )



I stepped the shrink wrap so the grommet would stay in place.







I also saved and labeled an extra grommet just in case I needed one later. Yes, I am building a service kit for the car that I will stow in the trunk.





I also ran the wires around the tank.



So it looks like I need to add one more Weld Stud...Ugh !!!



I finally received the fitting I need to connect the Fuel Pressure Sensor to the Fuel Rail. I am sorry I don't really like it as it has to many points that could leak.