Quote:
Originally Posted by rixtrix1
Interesting, Lance. Will you now have to box your frame and add more support for the third link or will this bolt in under the floor? The upper bracket template looks a lot shorter than most "racecar" 3-links.
|
See above ^
Bernie Duplan that designed this setup has been running it on his MCSS for a year, including several autocross events and has had no issues. The short answer is "we'll see" but I do not anticipate the need for any further reinforcement.
The car needed to get the axle side upper link mount lower to correct the horrible Instant Center and Rear Roll Center height. IC was 35" in front of axle centerline with 100% Anti Squat as it was, looking to get AS in the 70-75% range and RCH somewhere below axle centerline to start out.