Thanks guys, I appreciate the kind words.
Thanks for posting the link Jody, I don't know how to get that link myself.
The kit from Gordie consists of the brackets that bolt to each side of the aluminum cradle. The brackets than give you the correct location for the upper control arms to keep the geometry correct.
The bracket has a pocket in it that takes a 2" x 4" rectangular tube that you build the frame out of.
If you look back through my videos you will see the brackets bolted in place without any modification.
I'm working on the roll bar this week, I hope to get that completed so I can put the car over on its side to finish weld the sheet metal underneath and get some epoxy primer and seam sealer on it.
I would have liked to leave the body stock, unfortunately with this kit if you narrow the subframe its very difficult to fit the engine between the rails.
|