Next up is the installation of the Vintage Air unit and relocating the valve to the inner fender so it will be easier to service if needed.
So up to the garage attic I go and it's starting to empty.
This is the valve I will be relocating.
Since the valve was located in the interior I need to extend the wires out to the inner fender.
I need to enlarge the middle hole to 1/2" so somehow I was able to make a close to perfect circle with a dremel tool.
My buddy Jimmy stopped by to check on the progress and show me the new exhaust he built.
Mocking things up.
Making things pretty.
