[syborg tt]

This should be a simple project. If and when I have to drain the radiator I would love to be able to put a hose on the drain so I picked up a couple of these at Advance Auto.





I am finally going through all of the nuts and bolts and making sure everything is final tight.



More notes



I have had this ratchetting open end wrench set for years and it still comes in handy.



Mocking up the lines on the Vintage Air





I ran the lines in two different colors so I can quickly tell which is which when I am laying under the dash.





I finally found battery terminal covers that will actually work.





I was even able to find a suitable location for the optima battery charge wires.



Alternator wire cover.