Have I ever mention how much I love shimming a Torque Convertor....
Once again the passenger side header needs to come off.
Note... Don't forget to ZipTie the starter wires together.
Starter back off once again.
New ARP bolts
Here we go
I needed to add tape to my collapsible magnet magnet.
First Bolt in.
Well the tool cart is sure looking full.
In order to roll the motor over the plugs must come out.
So I don't have the pictures of me putting the last two bolts in but let's just say this job sucked !!!
Instead you get a nice picture of Remy.
Header going back in.
If you look close you will see that I forgot to zip tie the starter wires. I should have put a blue tape note on it.
I also moved the Lokar Dip Stick back one bank and it has a much better engagement with the block.
