[rocketrod]

All items have been sold.

1st Gen Camaro subframe SOLD

• Complete front subframe and suspension. Just add brakes of your choice, wheels and bolt it to your ride.
• OEM subframe sandblasted and powder coated satin black
• ATS 670 steering box with rag joint coupler
• AFX Spindles
• Fast ratio steering arms
• SPC Stage II Upper and Lower Control arms
• Varishock double adjustable front shocks
• Helwig swaybar
• Hotchkis 2' drop coil springs
• S&P LS Swap brackets
• Stainless steel brake lines
• Replaced inner/outer tie rods
• Hotchkis tie rod sleeves

C5 Corvette accessory drive - SOLD!!!

• GM C5 Corvette accessory drive (p/n 19155167): Includes alternator bracket, alternator, power steering pump, tensioner, belt and mounting bolts
• GM water pump (can't find p/n)
• GM balancer (p/n 12635649 w\ AN adapters https://www.gmpartsgiant.com/parts/g...-12635649.html)
• Include new OEM balancer bolt
• SD7 A/C compressor, polished. Incudes billet adapter for A/C connecting lines
• Holley LS A/C bracket (high mount p/n 20-134 https://www.holley.com/products/engi...s/parts/20-134
• Holley LS A/C bracket/ spacer (p/n 21-1 https://www.holley.com/products/ls_p...nts/parts/21-1)
• Serpentine belt
• All aluminum brackets were sprayed with etching primer then top coated with a light silver 2K paint.

Hydroboost and Master cylinder - SOLD!!!

• Hydroboost base model purchased from Hydratech
• Hydroboost has stainless steel slip cover
• Baer Remaster, 1 1/8" bore, black (has about 1,000 miles on it)
• Baer proportioning valve, mounting bracket and lines
• I can include the stainless steel lines and fittings