Just like the title says the front brake lines are still leaking !!!
Which means once again I am going to try to blead the brakes.
Apparently, the line is still leaking as it's constant bubbles under suction and there is fluid on the cardboard.
I am going to replace the banjo bolts since it's the only thing I haven't replaced.
UGH still leaking so I am calling it a night
11-21-22 Update (( I HAD TO WALK AWAY YESTERDAY )
I decided to put on the new lines that Tobin sent me to see if that was the issue. I created this unnecessary little line so I could just plug the line coming from the master cylinder. So many unnecessary pieces but it was fun using all of the pieces I had laying around. Lets just call it an anger management project and it worked. On one of my trips to the Autopart's store for the plug I found a discarded phone case that had the owners ID, Credit Cards and Debit card. Since the address wasn't far from my house I brought it to the address and left it on the front porch. y guess is they stole his phone and ditched the case.
New Lines installed & a slightly larger outside diameter crush washer which I picked up earlier in the day.
Drivers Side Line.
You can actually see the size difference of the crush washer even though it is very minimal.
Clean up time
Hopefully this solves the issue.