Please of Please make this the last time.
I also cycled the suspension to make sure the lines don't hit anything and I discovered the passenger side was hitting the upper control arm. So I loosened the line on the frame rail and took the tension out of it and set on the proper location/rotation.
Installed the top post batter covers since the battery is not hot !!!
Another nice easy project at least on one side and it's a good thing that I have plenty of bike water bottle hardware laying around.
Drivers side dust cover
It looks like the passenger side is going to be put on hold as I have no interest in removing the starter today.
I climbed back up in the attic and removed the Vintage Air controller to see if I could turn off the fan as when I turned the key to ignition on position the fan starts running.
Installed the defrost ductwork. I am not going to lie as I am most likely going to buy some new stuff as it's kindy dirty.
Remy taking a nap.
He did a poor job monitoring me install the washer bottle.
The parts on the shelf is smaller.
