Quote:
Originally Posted by CJD Automotive
Yeah, I saw that was the output, just didn't know if they were using more than one pin of the output connector to achieve that? Motec uses two output pins to provide 20 amps (the extra pin needed isn't counted towards outputs, so 8 - 20 amp outputs uses 16 pins). Just curious, like I said looks like a very affordable option. FYI, DT pins are only rated for 13 amps.
|
I received an answer back about this. The DT pins are rated at 13 amp @ 275°F (125°C). Under normal operating conditions, 20 amps is not a problem.
Andrew