This is not like me to leave my tools out.
Apparently, I was very tired and just didn't have it in me to clean up.
Today, I will be finishing up the connection to the fan and the battery.
I started running the wires to the fan like I had originally planned but that quickly changed.
I will need to make the hole a little bigger so I can put in a grommet. Which will allow me to run the wires safely through this hole.
I used Vaseline on the drill bit to capture the metal shavings.
The hole is bigger and the grommet fits perfectly.
I taped the three wires together to make it easier to route them.
Mocking up the wire routing to the battery.
Calling it a night and of course I created a list of things that I need to do.
