Cleaning Up the last little bit of wiring before I install the Vintage Air Unit.
I put labels on a few of the wires just in case I ever need to look at them.
I put Nylock nuts on the speaker bracket
I also labeled a few more wires from the Holley ECU
Tucked it neatly on the firewall above the steering column.
Time to trim the carpet around the Holley Transmission Harness.
There was a minor gap in the grommet so I filled it with Silicone.
Okay, this was fun. Time to reshape the carpet with the Heat Gun and it is very important that you heat the backside of the carpet not the front.
All better.
