I started working on the hose routing and the good news I don't plan to make it permanent just yet as I keep changing my mind.
I need to find a pre-bent hose from the Autoparts store that will jog around the massive Anvil Carbon Inner Fenders.
I also need to make sure the battery wires are not effected by the location of the hoses.
Hose # 1 would have been perfect if only it was a 5/8's hose.
Hose #2 looks like it will work and it's a 5/8's hose.
Napa Part # 11529
Yes, I label everything
I settled on these two hoses.
and NO I am not making the final connections as my brain isn't convince this is going to work.