This is big as the blue tape is finally coming off the metal part of the dash.
I loosely installed all of the clips to make it easier to install the dash pad.
Remy picture for Skip.
We all know what he is thinking "When is he going to finish this car !!! "
I gently placed the dash in the car since I will be doing it solo.
I tried to physically push the dash pad in to engage the clips and that didn't work at all. So, I moved to Plan B and removed
the all of the clips except the two middle clips. This allowed me to push the dash pad in and fell like it wasn't going to fall on
me while I laid under the dash and put the clips in and then slid the studs into the clips. It's very important not to tighten
any of the nuts till all of the clips are installed.
Well it looks like I am going to illuminate the Fasten Seat Belt Light as I like how it looks.
Last few nuts are now tight and I did install Nylock nuts over the nuts to make sure they don't come loose.
Looking in where the Dash surround will be I am very happy with my wiring as it is all easily accessible.
Calling it a night !!
